Algis Salys
Creator and owner of algissalys.com. Linux enthusiast, electronics tinkerer, and likes to spend time in the workshop building and creating new projects.
Projects - 45W SSB AM Linear CW FM Power Amplifier HF
45W SSB AM Linear CW FM Power Amplifier HF
HF Amp kit bought on eBay...another one
Projects - 10W Radio CW Transmitter 7.023MHz QRP Station Kits + RF 5M-9Mhz Power Amplifier
10W Radio CW Transmitter 7.023MHz QRP Station Kits + RF 5M-9Mhz Power Amplifier
HF Amp kit bought on eBay
Fishing Tip and Tricks
Fishing Tips and Tricks
A collection of miscellaneous information on fishing
APRS through the ISS with Kenwood TH-D72a radio
Digipeating APRS packets via the ISS using a Kenwood TH-D72a HT Radio
Send APRS packets without the use of software, through the International Space Station
The Kenwood TH-D72a HT is a versatile hand held ham radio, with its built in TNC, allows you to play with APRS locally as well as through space.
Network switch port blinker - Identify switch ports with Windows batch file
Windows Network Switch Port Blinker
Windows laptop running a batch file to identify remote network switch ports
Using a Windows laptop, and a simple batch file written with notepad, I was able to map out many network drops.
Raspberry Pi and Behringer x32 Mixer to control On-Air Sign
Raspberry Pi and a Behringer x32 Mixer controls an OnAir Sign
Polling channel status on the mixer over the local network to turn on / off sign
I was working on a side project for a small TV studio and they needed a way to automate their on-air sign, Pi to the rescue....
Freeswitch 1.7 + Raspberry Pi 2 = VoIP Sip Server
FreeSWITCH 1.7 Installed on Raspberry Pi 2
Installing, Compiling and running FreeSWITCH on the Pi 2
The long and awaited for... FreeSWITCH 1.7 running on a Raspberry Pi 2 guide.
Nokia 5110 LCD Backlight To Ground Using GPIO
Nokia 5110 LCD Backlight that requires ground
Use GPIO on Raspberry Pi to turn it on and off
Many times the Nokia 5110 LCD backlight is turned on with 3.3V (a current source), but many of the low cost LCDs from eBay are wired as common anode, meaning you need to apply a Ground (a current sink) in order to light the backlight.